DIAMOND/CBN TOOLS  
  ::Diamond Dressers:: (download)  
     
   
     
 

A diamond dresser has single or multiple diamonds mounted on a tip of its shank by a sintering process, ensuring
the selected diamond(s) won’t loosen or fall out from the heat and pressure of use.

Diamond dressers are widely used for truing and dressing of conventional abrasive grinding wheels.
A vast range of dressers from the typical single point dresser to rotary wheel dressers is available.

  
     
 
Single Point Dressers           click for standard specs
 
Dressers with a selected diamond crystal mounted in one shank.
The point of the set diamond is concentric with the shank.
The diamond dresser should be attached at an angle of 10~15 degrees from the horizontal axis of the grinding wheel, at an angle of 10 degrees to the circumference of the wheel.
   
Multi Point Dressers           click for standard specs
 

Dressers with several comparatively small and uniform diamonds mounted in one shank.
Dressing force is spread across multiple diamond points, achieving longer tool life, avoiding early tool failure and allowing fast dressing.
Particularly suit to use in rough finishes such as conical grinding, inner surface grinding, center-less grinding, dressing of convex surface and the side of grinding wheels.
   
Forming Dressers           click for standard specs
 

Dressers with a single high quality diamond that has been polished to the required shape and dimensions to dress specific forms into conventional abrasive grinding wheels quickly and accurately.
Forming dressers have a wedge shape with an angle of between 55° and 70° to ensure that the corner of the diamond does not touch the grinding wheel.
   
Impregnated Bond Dressers           click for standard specs
 

Dressers with fine diamond grains fixed into the required shape and dimensions using a metallic bonding material, and attached to a shank.
Soft bond dresser is for adjusting the surface and the form of the abrasive grinding wheel for cylindrical applications and it can cleanly adjust the grinding wheels with sharp shapes.
Hard bond dresser is suited to center-less grinding of large size grinding wheels and works evenly on the grinding wheel with great cost-performance.
   
 
      
 
  SINGLE POINT DRESSERS    

 

    
Code No D L
A1A-C2A-01 10 100
A1A-C2A-02 12 100
Others Pls specify D and L
 
Code No D HD L L1
A1G-C2A-01 6 12 27 12
A1G-C2A-02 8 12 26 16
Others Pls specify D,HD,L & L1
       
       

 

    
Code No D HD L L1 Taper
A1M-01 6.3 5 26 22 1/50
A1M-02 12 10 36 27 MT#1
Others Pls specify D,HD,L, L1 & B
 
Code No D HD L L1 L2 L3 B Taper
A1M-01 9 12 31 21.5 9.5 7 10 MT#0
A1M-02 12 18 57 40 14 9 14 MT#1
Others Pls specify D,HD,L, L1, L2, L3, B & Taper
       
       

 

    
Code No DxPitch L K Q
A1S-01 M8x1.0 16 1 2
A1S-02 M12x1.5 40 2 2
Others Pls specify DxPitch,L,K & Q
 
Code No D L L1
A2E--01 6 8 4
A2E-02 10 16 7
Others Pls specify D,L & L1
 
       
       

 

  
Code No D E L L1
A2C-01 11 9.5 40 3
Others Pls specify D,E,L & L1
 
Code No D HD L L1 B
A2H-CH3-01 6 12 27 12 8
A2H-CH3-02 11 16 35 20 13
Others Pls specify D,HD,L, L1 & B
 
       
       

 

      
Code No D L V R K Q A
C2B-01 7 11.5 90 0.2 1 1.5 1.5
C2B-02 7 19.5 90 0.2 1 1.5 1.5
Others Pls specify D,L,V,R,K,Q,A
 
       
     
  MULTIPOINT DRESSERS

 

  

 

  
Code No D L
MD6-01 11 30
MD6-02 11 50
MD6-03 12 50
 
Code No Angle Axis Dimensions
MD7-01 0
MD7-02 -10°
MD7-03 0
MD7-04 -10°
 
       
     
  FORMING DRESSERS

Code No FD1-01
 

Code No FD2-01
 
       
     
  IMPREGNATED BOND DRESSERS

 
Code No D1 X D L
BD 101 3 3 8 50
BD 102 3 5 10 50
BD 103 3 8 11 50
 
   
   
   
SPECIFICATION
 

BD -1M

 
 
 Mark  Grit
 C  Coarse
 M  Medium
 F  Fine
 
       
       
 
 
Shape Code No. Diamond part dimensions Axis Dimensions
BD 111 6d x 7 Standard 11 x 50L (You can also specify your own dimensions)
112 8d x 7
113 10d x 7
BD 212 4W x 10L x 10 11 ø x 50L (Stepped)
222 6W x 13L x 7
232 6W x 20L x 7
BD 310 4W x 10L x 8x x 15° 11 ø x 50L (Stepped)
320 6W x 13L x 8x x 15°
330 6W x 20L x 8x x 15°
 
     
  Copyright © 2009 Young Han Hi-Tech Sdn Bhd (Co. No. 763364-T) . Web Site Designed By NetBusiness Solution